Course Catalog | Department of Civil

Course Catalog

CED410
Natural Hazards and Disasters
3.00
Undergraduate

Natural Hazards and Disasters

 

For more details click here 

CED429
Industrial Environment Management
3.00
Undergraduate

CHAPTER 1: Introduction to environmental management in industries: Brief of industrial pollution, environmental engineering, environmental ethics, environmental impact assessment (EIA) for industrial projects, concerns of industrial pollution, major industrial project activities requiring prior environmental clearance, environmental acts and rules, introduction to water pollution and control, characterization of air pollution emissions.

CHAPTER 2: Solid and hazardous wastes in industries: Sources and types of wastes, definitions, concepts and management aspects, exports, imports and commercial treatment of hazardous waste, management of hazardous waste and non-hazardous waste in industries, toxic transfers to treatment and disposal facilities, waste treatment and disposal, laws and rules for industrial wastes, case study for industrial waste management.

CHAPTER 3: Water use and industrial wastewater: Industrial water requirements, parameters for assessment of water quality, deterioration of water quality, industrial water demand in the break of unit operation, water demand for different industries, measurement of water pollution parameters in waste water released from industrial treatment process, general standards for discharge of environmental pollutants, industry-based wastewater generation standards, recycle and reuse of industrial wastewater.

CHAPTER 4: Control and removal of specific pollutants in industrial wastewaters: Unit processes and operations to remove oil and grease, cyanide, fluoride, toxic organics, heavy metals, radioactivity substances, some advanced technologies for removal of toxic contaminants from industrial wastewater.

CHAPTER 5: Air quality monitoring in industries: Measurement methods of criteria air pollutants in industries, stack sampling at industrial chimneys, ambient and industrial air
2 | Page quality standards, load based industrial standards, concentration-based standards, air quality management in industries, compliance of air quality legislations in industries.

CHAPTER 6: Control of gaseous and particulate emissions, air quality management in industries: Control equipment including hood and ducts, tall stacks, electrostatic precipitator, scrubbers, thermal oxidizers and catalytic oxidizers, recent trends in industrial waste management, cradle to grave concept, life cycle analysis, clean technologies concept in industries.

CHAPTER 7: Environmental impact assessment (EIA) of industrial projects: Definitions, methodology for procedure of EIA prior to project commencement of different industrial projects such as road project, hydroelectric power plant, thermal power plant, manufacturing industries and building projects.

CHAPTER 8: Environmental audits in industries: Definitions and concepts, environmental audit versus accounts audit, internal audits, external audits, compliance audit, relevant methodologies, regulations, introduction to ISO and ISO 14000, difference between ISO 9000 and 14000, standard procedure to achieve ISO 14000.

CHAPTER 9: Case studies on environmental management in industries: Brief ideas of unit operations and processes in industries for production, material flow diagrams, water requirements, wastewater generations, hazardous waste management, air quality management. The industries of consideration are dairy production plant, fertilizer manufacturing industry, distillery industry, cement production industry, pharmaceutical industry and sugar production industry.

CHAPTER 10: Case studies on environmental management in industries: Similar contents of Chapter 9. However, the industries of consideration are pulp and paper industries, iron and steel production plant, metal plating industry, aluminum industry, textile industry and thermal power plant.

CED317
Experimental Techniques and NDT
3.00
Undergraduate

Experimental methods, analysis of experimental data analysis, Data acquisition and processing, designing the experiment and NDT techniques 

CED207
Hydraulic Engineering
3.00
Undergraduate

Types of open channel flow, resistance relationships in open channel flow, Uniform Flow, use of momentum principle in open channel flow, concept of specific energy and specific force, velocity measurement, flow profiles, draw down and back water curves, hydraulic jumps, basic characteristics of jump, energy dissipation due to jumps, types of turbines, operating characteristic curves, cavitation.

CED209
Seminar I
1.00
Undergraduate

Course description not available.

CED210
Sustainable Infrastructure
3.00
Undergraduate

Discussion around the key issues-energy, water, transportation, communication, natural resources and ecology, planning for a sustainable and resilient infrastructure, methods, materials, processes, technologies, practices, and operations for sustainable infrastructure

CED212
Seminar I
0.00
Undergraduate

 

For details click here 

CED301
Structural Analysis II
3.00
Undergraduate

Introduction to Statically Indeterminate Structures, Analysis of Statically Indeterminate Beams, Matrix Stiffness method, Plastic Analysis

CED302
Soil Mechanics
4.00
Undergraduate

Soil mechanics for analysis and design of foundations, both shallow and deep, and of earth retaining structures. Theory of lateral earth pressure; Methods of analyses; Bearing capacity theories; Design of

shallow foundations: strip footings, isolated footings, combined footings, rafts, Foundations in difficult grounds; Ground improvement techniques; Soil reinforcement.

For more details click here 

CED303
Water Resources Engineering
3.00
Undergraduate

Irrigation Engineering, Engineering structures for water control including Canals systems, Diversion Head works, Canal Falls, Canal regulation works, Cross Drainage works. Dams and reservoirs, Gravity dams, Earth dams, Spillways

CED304
Transportation Engineering - I
4.00
Undergraduate

Introduction to transport system, Traffic Engineering, Roadway Geometry, Materials, Pavement Design

For details click here 

CED305
Design of Reinforced Concrete Structures
3.00
Undergraduate

Introduction to reinforced concrete; Loads and load combinations; Basis of structural design, design philosophies, limit states method; Design for flexure, shear, bond and torsion; 

Design of structural components of buildings; Limit state of serviceability.

for detailed syllabus click here

 

CED306
Foundation Engineering and Design
3.00
Undergraduate

Soil mechanics for analysis and design of foundations, both shallow and deep, and of earth retaining structures. Theory of lateral earth pressure; Methods of analyses; Bearing capacity theories; Design of shallow foundations: strip footings, isolated footings, combined footings, rafts, Foundations in difficult grounds; Ground improvement techniques; Soil reinforcement.

For detailed syllabus click here 

CED307
Estimating, Costing and Project Management
4.00
Undergraduate

Cash Flow Analysis, Uncertainty and Risk Analysis. Various phases of Project, Project proposal, Components of planning, Objectives of planning, factors affecting planning. Job Planning: Bar diagrams and bar charts, C.P.M. , P.E.R.T. : Event identification, event time, network preparation and analysis, precedence network and cost interaction. principles of estimating. Methods of taking out quantities of items of work. Mode of measurement, measurement sheet and abstract sheet, bill of quantities.

For detailed syllabus click here 

CED310
Remote Sensing and GIS: An Introduction and Applications
3.00
Undergraduate

Course description not available.

CED311
Transportation Engineering II
3.00
Undergraduate

Overview of travel behavior in Indian cities; introduction to transport-related data sources in India; introduction to land use and transport interaction; definitions of terms and basic
principles; introduction to the four-stage modelling process. The first stage (generation), category analysis, regression analysis and modelling trip ends. The second stage (trip
distribution): estimating the trip matrix. The third stage (modal split): predicting mode use, The fourth stage (assignment): network assignment.

For more details click here 

CED312
Advanced Design of RCC Structures
3.00
Undergraduate

Course description not available.

CED313
Seminar II
0.00
Undergraduate

Course description not available.

CED314
Structural Dynamics
3.00
Undergraduate

Fundamentals of vibration,  Dynamic equilibrium of structures,  Formulation of dynamic models for discrete and continuous structures,  Response of single degree of freedom systems to periodic and non-periodic excitations,  Response spectra,  Response of two degree of freedom systems,  Response of multi-degree of freedom systems,  Response of continuous systems,  Random Vibrations

For more details click here

CED315
Environmental Management in Industries
3.00
Undergraduate

Sources and Types of Wastes: Solid, liquid and gaseous wastes, Water Use in Industry: Industrial water quality requirements, deterioration of water quality, Control and Removal of Specific Pollutants in Industrial Wastewaters, Solid and Hazardous Wastes, Control of Gaseous Emissions, 

CED401
Design of Steel Structures
3.00
Undergraduate

Design Approach, Limit state analysis as per IS 800:2007, Design of connections, tension, compression member, Design of beams and truss, Plastic analysis of the structure 

For detailed syllabus click here

CED402
Statistics in Structures
3.00
Undergraduate

Importance of statistics, Data generation for statistics, Random Sampling, Hypothesis testing and goodness of fit, Analysis of variance, Statistics in the context of Civil  Engineering: Normal distribution, Characteristic strength, Factor of Safety, Design loads and ultimate capacity, Economic implications of confidence factor and design methodology.

CED403
Pavement Design
3.00
Undergraduate

Pavement Types, Wheel Loads, Design Factors, Vehicle and Traffic Considerations, Climate, and Environment. 2. Properties of pavement component materials and material characterization,  Stresses in Flexible Pavements. Stresses in Rigid Pavements,  Philosophy of design of flexible and rigid pavements,  Design of flexible and rigid pavements using different methods, Design of overlays and drainage system, Pavement failure and maintenance

CED404
Basics of Photogrammetry and GPS
3.00
Undergraduate

Introduction to Remote Sensing, Satellite platforms, sensors and resolutions Platforms: Airborne and Space borne, Sensors: Passive and Active, resolutions across track and along the track,  Applications of Remote sensing in Environmental monitoring and assessment, Applications of Remote sensing in Disaster Management, Concepts on GIS, Data acquisition and analysis, GIS software and Case studies

CED405
Air Quality Science and Engineering
3.00
Undergraduate

Physical and chemical processes responsible for fate and transport of pollutants in the atmosphere, identifying and evaluating mitigation measures of existing concentrations levels of these air pollutants, atmospheric modeling techniques to examine the distributions of pollutants, Basics of air pollution including unit of expression and measurement techniques; Sources of air pollutants in the environment; Aerosol/particulate matter.

CED407
Transportation Systems
3.00
Undergraduate

transportation systems, transportation economics, transportation planning, financing and pricing, issues of equity in transportation, transportation safety, transportation regulation and policy, sustainable transportation systems.

CED409
Geotechnical Earthquake Engineering
3.00
Undergraduate

Vibration theory; Engineering seismology, Wave propagation through soils; Dynamic soil properties, Strong ground motion; Seismic hazard analysis; Seismic ground response analysis; Liquefaction and lateral spreading; Seismic microzonation, Seismic analysis and seismic performance assessment of structures.

For details click here 

CED411
EARTHQUAKE ENGINEERING
3.00
Undergraduate

Causes of earthquakes and seismic waves; Measurement of earthquakes and measurement parameters, Linear earthquake analysis: idealization of structures, equations of motion for SDOF and MDOF systems, Nonlinear earthquake analysis: force-deformation relationships, equation of motion, controlling parameters, Vibration control systems; Concepts of active and passive controls; Base isolation for earthquake resistant design of structures: isolation systems and their modeling.

For details click here 

CED414
Soil Dynamics
3.00
Undergraduate

Wave propagation in elastic rods, in an elastic infinite medium, and in semi-elastic half space, wave generated by surface footing. Field and laboratory tests for evaluation of dynamic properties of soil under vertical vibration, coefficient of elastic uniform compression, coefficient of elastic uniform shear, damping ratio and shear modulus of soils. Liquefaction of soils, criterion and factor affecting liquefaction of soil, laboratory and field studies on liquefaction, liquefaction studies in oscillatory simple shear, evaluation of liquefaction potentials, liquefaction of clay.

CED415
Project
20.00
Undergraduate

Course description not available.

CED416
Project-I
9.00
Undergraduate

Course description not available.

CED417
Internship/Project-II
12.00
Undergraduate

Course description not available.

CED418
Project-II
6.00
Undergraduate

Course description not available.

CED419
Internship/Project-II
6.00
Undergraduate

Course description not available.

CED421
Public Transport Systems
2.00
Undergraduate

Urban public transportation modes, systems, and services, focusing on bus and rail. Technological characteristics and their impacts on capacity, service quality, and cost, Current practice and new methods for data collection and analysis, performance monitoring, route design, frequency determination, and vehicle and crew scheduling

For more details click here 

CED422
Transportation Law Seminar
2.00
Undergraduate

Course description not available.

CED426
Transport Infrastructure
2.00
Undergraduate

Travel behavior in Indian cities; introduction to transport-related data sources in India; introduction to land use and transport interaction; definitions of terms and basic principles; introduction to the four-stage modelling process. The first stage (generation): category analysis, regression analysis and modelling trip ends. The second stage (trip distribution): estimating the trip matrix. The third stage (modal split): predicting mode use. The fourth stage (assignment): network assignment.

CED427
TBA III
3.00
Undergraduate

Course description not available.

CCC619
Transportation Simulation and Modelling
1.50
Undergraduate

Course description not available.

CCC708
Solid Waste Management
3.00
Undergraduate
CED101
Engineering Mechanics
4.00
Undergraduate

Fundamentals of Mechanics, Equivalent Force-Couple Systems, Simple Resultant, Equilibrium of 2D and 3D Systems, Truss, Friction, Methods of Virtual Work and Potential Energy,

Dynamics and Vibrations.

For detailed syllabus click here

CED102
Engineering Graphics
2.00
Undergraduate

Course description not available.

CED103
Material Science and Engineering
3.00
Undergraduate

Structural morphology, basic structural elements and force systems, Mechanical properties (strength, structural performance), Classical building materials, New age building materials, Miscellaneous materials:

For detailed syllabus click here

CED201
Strength of Materials
4.00
Undergraduate

Stresses and Strains, Principal stress & principal strain, Transformation of plane strain, Mohr’s circle for plane strain, Constitutive Relationships, Beam statics, Beam bending & Shear, Torsion, Buckling

For detailed syllabus click here 

CED202
Fluid Mechanics
4.00
Undergraduate

Studies fluids ( liquids , gases , and plasmas ) and the forces, Fluid statics; Fluid kinematics; Fluid dynamics; Flow through pipes; Dimensional analysis and similitude; Boundary Layer Analysis; & Flow Measurement Devices

For detailed syllabus click here

CED203
Engineering Hydrology
2.00
Undergraduate

Hydrologic cycle – types of precipitation, measurement of rainfall – spatial measurement methods – temporal measurement methods, precipitation and losses, stream flow measurement, hydrographs, floods and flood routing

CED204
Structural Analysis I
3.00
Undergraduate

Structure, load, response, Force response in statically determinate structures, Displacement response in statically determinate structures, Analysis of statically indeterminate structures

For more details click here 

CED205
Concrete Technology
4.00
Undergraduate

Cement, aggregate, concrete, chemical and mineral admixture, Mix design, Properties of fresh and hardened concrete, Durability and special concrete

for detailed syllabus click here 

CED206
Elements of Surveying
4.00
Undergraduate

measuring linear distances and angles, chain, compass, plane table, levelling and contouring, Area and volume calculation, Theodolite, and Electronic devices in Surveying.

For more details click here 

CED602
Structural Dynamics
4.00
Graduate

Vibration of elementary system, Degrees of freedom, Analysis of system with one degree of freedom, spring-mass system, harmonic vibration, uniform circular motion,
natural frequency, free and forced vibrations with and without damping, types of damping

 

for details click here

CED605
Advanced Structural Analysis
4.00
Graduate

Matrix method of structural analysis

CED607
Advanced R.CC Design
3.00
Graduate

Course description not available.

CED612
Fracture Mechanics
3.00
Graduate

Course description not available.

CED613
Structural Optimization
3.00
Graduate

Course description not available.

CED624
Independent Study (Fluid Structure Interaction)
3.00
Graduate

Course description not available.

CED625
Structural Health Monitoring
2.00
Graduate

 

For details click here 

CED631
Air Pollution Control
4.00
Graduate

Introduction to air quality science and engineering; Basics of air pollution including unit of expression and measurement techniques; Sources of air pollutants in the environment;
Aerosol/particulate matter, and classification of particulate matter; Atmospheric transformation of air pollutants; Meteorology as applied to air pollution and dispersion of air pollutants; Air quality dispersion modeling techniques; Selection of control equipment; Engineering control concepts; Process change; Fuel change; Pollutant removal and disposal of pollutants; Control devices and systems; Removal of dry particulate matter; Liquid droplets and mist removal; Gaseous pollutants and odour removal; Control of stationary and mobile sources; and Source apportionment modeling techniques.

CED632
Transport Infrastructure
3.00
Graduate

Course description not available.

CED633
Experimental Techniques and NDT
3.00
Graduate

For details click here 

CED636
Computational Geomechanics
3.00
Graduate

Course description not available.

CED641
Natural Hazards and Disasters
4.00
Graduate

For details click here 

CED642
Applied Statistics
4.00
Graduate

Course description not available.

CED643
Numerical Methods
4.00
Graduate

 

For details Click here 

CED644
Industrial Wastewater Treatment
3.00
Graduate

Water and Waste water Quantity Estimation, Water Distribution and Sewerage Systems, Elements of Water Supply Scheme, Water/Wastewater Quality Enhancement, Physicochemical Processes, Surface and Ground Water Treatment, Biological Processes for Water and Wastewater Quality Enhancement, Elements of Wastewater Disposal Schemes, Rural Water Supply and Sanitation, Water and Wastewater Effluent Treatment Plants, Recent trend & development in field of water and wastewater engineering.

For details click here 

CED645
Transportation Law Studies
3.00
Graduate

Course description not available.

CED654
Photogrammetry and GPS
4.00
Graduate

Aerial photographs and photography is essential component. This course introduces students to its basics such as its history, importance, using aerial photographs for measurements of various structures on earth’s surface. Global Positioning System (GPS), methods of capturing data using GPS, determining and increasing accuracy of GPS data.

CED655
Advanced Surveying
4.00
Graduate

Course description not available.

CED656
Advance Remote Sensing and GIS
4.00
Graduate

Course description not available.

CED660
Climate And Climate Change
2.00
Graduate

Course description not available.

CED661
Air Quality Science and Engineering
4.00
Graduate

physical and chemical processes responsible for fate and transport of pollutants in the atmosphere, identifying and evaluating mitigation measures of existing concentrations levels of these air pollutants, atmospheric modeling techniques to examine the distributions of pollutants, Basics of air pollution including unit of expression and measurement techniques; Sources of air pollutants in the environment; Aerosol/particulate matter.

CED663
Environmental Engineering
4.00
Graduate

Water and Wastewater Quantity Estimation, Water Distribution and Sewerage Systems, Elements of Water Supply Scheme, Water/Wastewater Quality Enhancement, Physicochemical Processes, Surface and Ground Water Treatment, Biological Processes for Water and Wastewater Quality Enhancement, Elements of Wastewater Disposal Schemes, Rural Water Supply and Sanitation, Water and Wastewater Effluent Treatment Plants, Recent trend & development in field of water and wastewater engineering.

For details click here

CED664
Engineering Hydrology
3.00
Graduate

Hydrologic cycle – types of precipitation, measurement of rainfall – spatial measurement methods – temporal measurement methods, precipitation and losses, stream flow measurement, hydrographs, floods and flood routing

CED670
Advanced Soil Mechanics
5.00
Graduate

Course description not available.

CED671
Geotechnical Earthquake Engineering
4.00
Graduate

Course description not available.

CED672
Foundation Engineering and Design
4.00
Graduate

Soil mechanics for analysis and design of foundations, both shallow and deep, and of earth retaining structures. Theory of lateral earth pressure; Methods of analyses; Bearing capacity theories; Design of

shallow foundations: strip footings, isolated footings, combined footings, rafts, Foundations in difficult grounds; Ground improvement techniques; Soil reinforcement.

CED673
Structural Dynamics
4.00
Graduate

Course description not available.

CED699
Seminar
2.00
Graduate

For Details Click here 

CED788
M. Tech. Major Project / Thesis
12.00
Graduate

Course description not available.

CED799
M.Tech Thesis
12.00
Graduate

Course description not available.

CED891
Research Methodology
2.00
Graduate

Introduction to Research Methodology, Scientific Ethics (or norms and conventions), Sources of Information for Research Articles, Literature Review and Formulation of a Research Problem, Conducting Research in the Laboratory, Writing a Manuscript:

For Details click here 

CED892
Research Methodology 2
2.00
Graduate

For details click here